Geil
Modular Hydroponic Tower Garden
Modular Hydroponic Tower Garden by boundarycondition on Thingiverse: https://www.thingiverse.com/thing:3405964
1,851
10 k
45
60 k
updated
June 9, 2026
Makes
Comments
Which piece do I need to print to connect the tower to the 5 gallon bucket file?
If anyone is active here and can help me. I printed the base "base-liso-adaptador-2-orificio-grande" and main tube part "Módulo liso de 3 vías v2 (orificio grande) (Pared gruesa)" both at 100% size with PETG HF but they don't fit together. I can't twist the part to lock it in. What can I do? Does anyone have a plan on what parts to print, if yes, I would also ask for file names so its easier to find. Thank you!
Any instructions on how to put together - so many files - I'm not sure what to print to get started.
Thank you for preserving the design and making it available here. 👍
For my tower, I’ve also designed a threaded fitting to connect it to my 100-litre barrel, as well as a cap for routing the power cable through. The STEP files were really very helpful for this.
were can i find the print for the grow light bracketsty
I made two of these towers. Many thanks to the creator. They work perfectly. Printed in ludicrous mode on my centuri carbon printer. Using PETG filament.
Works well as you can see. I'll update if we get any produce. Using some nutrients I got a while back.
What’s up with the documentation for this?
My current plan is to print every single file. 4 hours each until one pile represents the parts I need and the other pile is in the trash. (edited)
@NapR2LBZvroC_1178498 This is a re-upload of the original design to preserve the legacy of BoundaryCondition (the original creator).
To get started, choose the pot, cone, or adapter for the bottom piece that the entire tower sits on. Next, select the filling module (if desired), followed by the planting modules. Print the standard pots (net cups) to fit into the planting holes. You will also need to print the dispenser, stream breaker, and a lid.
Run a tube through the center and connect it to a pump (you can add a timer if you like). That’s it, your tower is ready.
Please check the many already published prints for assembly guidance and to see exactly which parts need to be printed.
There’s no need to be rude about it, you could have simply asked which parts need printing.
@chrisebryan okay I’ll delete the unnecessary second line.
View one more comment
I've actually printed this tower 3 times now! The first print was black, the second was white - but I coated it in a clearcoat paint - which was rushed and ended up allowing quite a few organisms to grow in between the tower's sections, and finally, this iteration - which was printed in PLA, and hasn't had any finish on it. I've made some custom parts to fit 1/2" PVC pipes, and moved the tower off of the reservoir so I don't have to put the whole thing back on an internal tube every time I take the tower off to refresh the nutrient solution. If you'd like the designs for the custom parts I made, let me know, and I'll upload them as a remix. I'm just too lazy to do that if I don't know that anyone is going to use them.
Hey! You have an awesome set up! Can you please share the design for the custom parts please
@SamEspi_4240551 Sure! I'm still working out a couple kinks in the main stand, but I'll upload the parts as a remix, give me a bit to get all the files exported and put them up on printables
View 2 more comments