F-Box Wall Mount

I needed a way to mount my F-Boxes onto the wall so I would have more desk space. I came up with a mounting system using a French cleat. There's 3 parts total, the F-Box Hook, the F-Box foot, and the French Cleat itself. 

Each F-Box hook part needs a M3 Hex Nut and M3x10 bolt, both should be readily available from the left over hardware from any Prusa printer. (If you don't have those, glue or some 3M adhesive will probably work just fine as well.)

You'll also need some screws to mount the cleat to the wall.

Printed in PETG 0.6, 2 perimeters at 10% infill.