Scale model adjustable stand

This adjustable stand is designed to hold almost every model you can think of using a sturdy but material-saving baseplate, movable and rotatabel sliders and holders to find the perfect position and easily accessable knobs.

The baseplate is designed to fit on a bambu lab X1/P1 printer. Size can be modified using the included fusion 360 file (modify the first sketch) or you can request a different size and I will add it to the files list.

Assembly Instructions:

• The sliders and sliderblocks use a captive M6 nut, pause the print at the right layer to place the nut inside the parts. (tip for bambu lab users: slice plate → use the layer slider and go to the layer you want to add the pause → right click on the slider and add pause)
• The bolts are press fitted in the knobs → push the bolt trough the knob and use a nut and tighten it to pull the bolt further in the knob
• ! The knob at the base of the slider doesn't fit when the bolt is already installed in it so you need to align the knob on the slider first, then push the bolt trough !

Parts to print:

• 1x Baseplate
• 8x Knob
• 4x Slider
• 4x SliderBlock
• 2x VMount
• 2x FlatMount

Extra hardware:

• 8x M6x20 hex bolt
• 8x M6 nut