Egg Plant Emoji Lightbox w Optional Stand

A funny lightbox featuring the famous egg plant emoji and optional stand
8
22
0
112
updated December 2, 2023

Description

PDF

The funny eggplant emoji LED lightbox is an amusing addition to any space, featuring the infamous emoji design with enhanced LED illumination for a playful touch. Its quirky and entertaining nature makes it a unique decor item that adds humor and charm to the room, sparking laughter and conversation wherever it's placed. Chose to download with or without the stand.

Materials 

Materials and tools required for this project include a glue gun, aluminum tape, and an LED USB strip. Additionally, a soldering iron is optional for those who may choose to use it.

Suggestions

1. Opt for a textured PEI sheet for improved printing results.
2. Utilize the recommended print profile, as it includes several settings conducive to achieving optimal results.
3. Create a hole for the USB strip at your preferred location, using a soldering iron, drill, or by adjusting settings in the slicer. 

4. Enhance light diffusion by applying aluminum tape to the inside of the backplate.
5. When placing the LED lights, ensure they are positioned as far away from the colored design as possible to prevent diffusion issues and the visibility of individual LEDs.

Bambu Studio Settings

For optimal results, I highly advise utilizing the provided print profile. However, if you opt not to, here are the key slicer settings recommendations:

1. Navigate to preferences (ctrl + P), activate developer settings, then go to Quality → Advanced → First Layer Flow Ratio: 1.04 to 1.08.
2. Under Quality, choose Wall generator → Arachne.
3. Set Quality → Wall transitioning threshold angle to 50º.
4. In Strength → Advanced, adjust Infill/wall overlap to 20% to 25%.
5. Quality → Advanced → Activate "Avoid crossing walls."
6. To minimize stringing, consider increasing retraction or reducing temperature.
7. When color printing, order the colors from the lightest to the darkest.

Print Settings

0.4mm Nozzle @ .2mm

3 bottom layers

15% gyroid infill on base

First layer speeds, 30mms and 60mms for first layer infill

Tags



Model origin

The author marked this model as their own original creation.

License