UnBolt

For pin assembly check: https://github.com/majarspeed/Unklicky/tree/main/Unklicky_Endstops/Unklicky_z

For better results I would recommend running a repeatability test of at least 500 probes in order to fully “break in" the motion.

BOM:

3 - 6x3mm magnets

1 - M3 16mm SHCS

1 - M3 3 or 4mm BHCS

4 - M2 12mm Self-Tapping screws

2 - M3x5x4mm Heat Set Inserts

1 - 2pin JST-XH (optional but fits the hole)

Original SexBolt body adapted to work as an unklicky.