I have scaled down the Skadis to fit on to the build plate for a P1S, P1P and X1C. If you add one more row or column it wont fit. You might want to print this blocker that keeps the printing head from hitting the cutter when going into the exclusion zone. This wiki link will explain https://wiki.bambulab.com/en/knowledge-sharing/print-volume-limitations. I did accidently print it without the blocker in and it didn't effect it but that may because I tried to position it to the opposite corner from the restricted area as much as possible. If you do put in the blocker once the print has finished you will get an error that the print has failed but all you have to do is remove in and hit retry. Then it will go cut an unload the filament and complete the job. The print profile should have the exclusion taken out but let me know if that didn't carry over and I will try to update it
Six of these models will get you roughly one board that Ikea sells. You do lose some space with different connectors but you can also print as many of these and arrange them in much more unique ways. There is also some cost savings based on filament price.
The author marked this model as their own original creation.