Shelly Plus H&T - Wall Mount - Centered

Shelly Plus H&T Humidity & Temperature smart sensor mount using only one screw and centered. Sensor has mounting holes on the back but these are by design off center. This mount resolves that.

Print with PLA, PETG or any material you like. No supports are needed. Screw hole is 4 mm diameter, mount plate is 4 mm thick.

There are 2 versions:

Shelly-Plus-HT-WallMount-Centered - With mount hole in the center.

Shelly-Plus-HT-WallMount-Centered v2 - With mount hole higher off center to improve stability when mounted.

Let me know which one you like better.