Hobbywing Switchholder for 1/10 Scale Tekno SCT410 2.0 / MT410 2.0

ATTENTION:

the switch holder V1 is designed to be used with hobbywing 3652 motor or similar size!! (max lenght 53mm!!) otherwise use V2 or V3 instead.

a simple mount for the hobbywing ezrun esc.

the sct/mt410 2.0 chassis offers a place to mount a basic switch, i simply remixed the existing switch holder of suchtragedy and scaled it down since the 1/10 esc has a smaller switch.

you need:

V1 (any material)

1. 2x m2,5x10mm screws
2. 1x ziptie
3. 1x the mount itself
4. 2x washer (optional)

V2: (TPU) mounts on onto the front stering cover see pic labled V2

1. 1x ziptie
2. reuse the m4 screw

V3: (TPU) mounts onto the optional tekno rc brace

1. 3x zipties
2. optional brace TKR9585 for SCT/MT410 2.0

changed the screw tabs and resized to fit the smaller 1/10 push button switch