Xioami Light Bar Remote Mounting Plate

I wanted to mount my Xioami light bar remote under my desk without having visible mounting hardware, and without modifying the original baseplate. Luckily it has a simple twist-lock method of attaching that I modeled. This could be modified to add countersunk screw holes for a more permanent solution or just printed as is and VHB taped to something. I did the latter. 

The three twist-lock L hooks need to be supported in order for this print to work. I used auto-generated organic supports with 0.1 clearance and they pulled off easily enough with some small needle-nose pliers. Be careful though, the little hooks are fragile and it's easy to snap the whole thing off by accident.

I included the Fusion360 file in case anyone wants this as a starting point for a different mount.

I printed with the following settings:

• Prusa mk4 0.4mm nozzle with input shaping
• Prusament PLA + default profile
• 0.2mm layer height STRUCTURAL preset
• 3 perimeters
• Gyroid infill at 25%
• Auto generated organic supports with 0.1 clearance