Prusa XL Camera Mount - 1/4" hex bolt for 1/4" camera mount
Holds a 1/4"-20 mounted webcam to the Prusa XL 3030 frame
11
60
2
651
updated
December 1, 2023
Description
PDFPrinted with the Prusa XL in PETG, 3 perimeters, 0.25mm layer height, structural preset.
Attaches to frame with two M4 screws into slot-nuts. Model includes clamping plate that uses two M4x10mm screws and M4 nuts.
Tags
Model origin
The author remixed this model.
Differences of the remix compared to the original
Remixed a model designed for a Wyze camera so it could be used with a Logitech C920 webcam. Uses standard 1/4" bolt, so it will likely work with other cameras.
The C920 didn't bend down enough when mounted horizontally, so the platform was angled to accomodate it. Two angle version are uploaded: 45-degree (a bit too steep for the C920) and a 33-degree (not print-tested since the 45-deg is good enough, but it should allow adjustment of the camera using its bending adjustment).