There are two versions of the trim. Version one has a lip meant to nest with the Aerosport carbon fibre door sill. Version two has no lip. No drilling is required for either version, the holes are in place.
There are a total of 4 files for the main body of the trim for each side. They are numbered front to back with R1 being the most forward right side and L1 being the most forward left side. There are a total of 5 trim files which are the same for each groove. They are also numbered from front to back with 1 being the most forward and 5 being the most aft.
Printing…..
I used PETG. I found that slicing the files with the most outward face of the piece against the trim plate. No supports, and no skirt or brim were needed.
The author marked this model as their own original creation.