Woodworking Marking Square
An easy, quick way to mark up to 3 inches in from the edge of a workpiece.
58
178
1
1550
updated
December 1, 2023
Description
PDFMarked in eighths and sixteenths. Holes are sized for Pentel Graphgear 1000 .9mm or smaller. Uses M3 bolts for assembly, or you could print the STL in a complete piece if you felt daring and didn't mind a ton of support material. I printed at 0.1mm detail.
Tags
Model origin
The author marked this model as their own original creation.