Inspired by The 100. This direct drive printer is resizable and focused on maintenance ability with a little bit of pretty thrown in. All parts are printable on a 210x210 bed.
The tool head is currently still in WIP (files still to come). The front covers have not yet been tested. Join the discord server for details.
Suggest printing the frame with a larger nozzle to speed up the build. The first frame was printed successfully with a 0.8mm nozzle at 0.4mm layer height. Aim for 1.5mm externals in all directions (I printed with 2 walls and 4 top & bottom layers).
All parts should be printed in the orientation they are provided in.
Only the following parts require printing with support:
Cross-300/BottomLeft.stl
Cross-300/BottomRight.stl
Cross-300/TopLeft.stl
Cross-300/TopRight.stl
Cross-400/BottomLeft.stl
Cross-400/BottomRight.stl
Cross-400/TopLeft.stl
Cross-400/TopRight.stl
Gantry/CarrierLeft.stl (Future version will have support included)
Gantry/CarrierRight.stl (Future version will have support included)
Folders are organised with the rod length first and mount points second. eg: BedCarrier-300-190
references the bed carrier for a bed with 190mm gap between the mount holes, for a frame prepared for 300mm rods.
The author marked this model as their own original creation.