6 x Revo Nozzle Holder for 2020 Extrusion

2 different models to mount up to 6 Revo nozzles to 2020 extrusion.   One model will mount with in 2 holes within model, and the other model will mount with holes on the outer tabs and/or inner holes.

I chose no text as I use different sizes, including high flow.

It is printable without support.

Black model is printed in ABS+ on Voron 2.4 with no part cooling.  There was only minor sag on the inner arches.   Grey model printed in PLA+ with part cooling, no sag at the arches.

Designed to mount with M3 screws to hammer nuts or similar.