Nitrile Glove Box Wall Mount

A basic wallmount for your box of nitrile gloves.
14h 38m
2× print file
0.15 mm
0.40 mm
0.60 mm
74.00 g
16
145
0
468
updated December 1, 2023

Description

PDF

This is a simple wallmount designed to fit up to 3XL Glove Boxes and only two screws are required to hold it up. There are 4 screw holes if you want to throw a couple extra just in case.

 

Note

  • Designed for #6 wood screws, up to (7.25mm Head, 3.3mm Shaft, 80°).
  • The internal dimensions allow boxes up to 77.5mm x 135mm x (Any Reasonable Length)
  • If you have spaghetti detection of some form, it tends not to like these large hex patterned models.

 

Printing Recommendations

  • Can be printed without supports or brim
  • Possible problems with stringing if your filament is wet
    • Recommend using a heat gun to remove strings

 

Model Adjustments

To make larger boxes you can either scale the .step/.stl but for major changes or making it smaller, I would recommend just directly editing the fusion file. If you don't want to manually change the files, try Peter Davis's Models for Small to XL boxes.

Tags



Model origin

The author marked this model as their own original creation.

License