Self releasing croco bag clamp hook

Needed materials:

• For the two joints:
  • either 4 screws M3 x 6 mm or a bit longer
  • or 2 screws M3 x 30mm + 2 screw nuts M3
  • piece of filament for coupling the upper and lower jaw (+glue)
  • wobbly eyes
• 2 screws for mounting

The .3mf files are the way i printed it on a prusa from PLA.

Croco is a little tight, but grabs the garbage bag quite well. Only move the top part.

I used the step model and modified it a bit so that very thin things can be held