FPV Race Drone Start Block / Tiltable Stand

Required Hardware:

11x M5x20mm Bolt
3x M5 LockNut
4x M5 washer
2x 8x22x7 Bearing (skate/roller)

Print in PLA, or PETG

0.20mm and 15% or 20% is sufficient

I've uploaded all the original files from gianniceccanti and have added the following

1. A stiffer 98mm bottom brace
2. Triangular stoppers to keep drone from sliding too far forward
3. A small bracket for an m3 bolt to prevent the stand from rotating too far foward

I used 25mm m3 bolt, but you can easily go longer if you want less max angle