Assassin's Creed Hueforge

this print is on a bambu with dimensions of 110x220 so you may have to scale it down a little bit depending on what size your print bed is 

2 files available, one is a project file that you can load right into bambu studio.  Printed with a p1s.  Also added the stl file so you can load into your own slicer and add in the layer changes.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Blue Transmission Distance: 4
PLA BambuLab Basic Gray Transmission Distance: 2
PLA BambuLab Basic Jade White Transmission Distance: 5

Swap Instructions:
Start with Black
At layer #11 (1.04mm) swap to Blue
At layer #15 (1.36mm) swap to Gray
At layer #21 (1.84mm) swap to Jade White for the rest.