Viking Axe with Handle (No Glue Required)

Looking for a viking axe, but not wanting to deal with glue or non-printed metal screws?  Search no further :)

All elements printed with 20% infill and no supports except for the axe head which was printed top facing down with supports “Touching Buildplate Only”.

Tighten each of the three screws until the handle orientation and gap is at the desirable placement.

Note: Handle pieces can be repeated for an extra long handle.  If screws break to easily increase infill above 20% (depending on needed ruggedness). 

UPDATE - 12/15/2023

As an added bonus, the axe head can be unscrewed and replaced with a chain and giant spike ball to create a cool medieval morning star weapon prop.

Added an "optional_print_adjustments" folder which has a axe head with a flat top.  A little less fancy, but can be printed faster and without supports.  This folder also contains screws that are 98% of the size of the regular ones in case the normal fit is too tight on your prints.

• Mirrored half of axe head and filled in the handle hole
• Created bottom handle element to terminate the end of the stick
• Added screws and screw holes to enable glue-free assembly

Also, added central handle objects from @WF3D's awesome Assassin's Creed model (with new screw holes applied) at: https://www.printables.com/model/109074-assassins-creed-valhalla-eivors-axe