OMGV2 extruder bracket for Hero Me Gen 7

An adapter plate so you can mount the OMGV2 extruder onto the Hero Me Gen 7 toolhead. If you are using a pancake stepper, it's pretty much mandatory that you print this in something more heat tolerant than PLA. I used ASA, but PETG would probably work fine.

Print settings:

• 0.2mm layer height
• Orient either of the triangular sides onto the build plate
• Tree supports attached to build plate only

Reimplemented an adapter plate in openSCAD from scratch using the included model file “HMG7 EZR Struder Tall Front Mount.stl” as a reference.