BAMBU LAB SLIM TOOL PEI PLATE STICKER

I design a new Bambu Lab sticking film.

To print the original file you need to wait 2HOURS 45MINUTES + 117,68g!

You can already use my model after 1HOUR 2MINUTES + ONLY 32,96g!

YOU SAVE 1 HOURS 43 MINUTES!

If you set the printer at sport or ludicrous speed mode , of course you reduce the speed instead of quality. Keep this in mind!

That's a lot of time you spare even you have a 3D printer farm , so you are always busy!

Please do not download the first file you see, because you need to choose between the different profiles!

PROFILES :

a) in 1 color 15% INFILL 1h 2min, 32,96g , 0.20mm layer height and 3 wall loops

b) in 1 color 100% INFILL 1h18min, 48.57g , 0.20mm layer height and 3 wall loops

c) in 2 colors 100% INFILL 1h23min, 49.85g , 0.20mm layer height and 3 wall loops

Choose your preferences.

As an example I tried profile a) . I switched to ludicrous modus and you finish it in 34min!

After 34min, this is the result printing it with ludicrous mode using the profile a). :

Back using Bambu Lab High Temperature Plate:

What do you think? I think it looks good for that speed!

Remember the original tool brings you to wait 3h! That's a good deal!

I have printed this file with Bambu Lab PLA Black Matte.

Give me please a like and subscribe to my page to always be informed about my new 3D models and new designs.

If you need help or you want to be printed this parts or customized in different way, just send me a message here on Printables, I can ship worldwide and I promise very good quality prints.

I appreciate if you will give me a donation, so I can bring my ideas forward: https://bmc.link/engineeringprojetcs .

Thank you to support me and happy printing.