3DWORKBENCH 9mm Simple Concept Pistol

Thank you for checking out my page! If you’d like to support my work, consider subscribing. As a member, you'll gain access to **all my designs** along with **commercial rights** to sell physical prints of them for as long as your subscription is active.

______________________________________________________________

3DWORKBENCH 9mm Concept

This is a high detail prop model-kit for 3d-printing.

This model-kit contains 11 individual parts to ensure as much detail as possible.
All parts have orientation indexes for easy assembly.
The parts need to be glued; no additional hardware is required for this model.  

All parts will fit a 250 x 250 mm print-bed and are ready-to-print.

What does ready-to-print mean:
This means, that all parts are oriented to be dropped into your slicer.
Supports are not part of the model since everyone has its own preferences.

Detailed step by step instructions are included with this model.

______________________________________________________________

**Disclaimer:** These 3D models of guns and weapons are non-functional, dummy objects created solely as props or decorative items. They are intended strictly for entertainment and display purposes and have no real-world weapon functionality.

______________________________________________________________

**Please note:** All my files are protected by a Creative Commons (CC) license and are strictly intended for non-commercial use unless you have subscribed to a membership plan on Printables.

**Using my 3D files for commercial purposes without a subscription harms my work - please don’t do it!**

Thank you for respecting the time, creativity, and passion that go into each of these designs.

______________________________________________________________

3D Printers used for this model:

Bambulab A1

Bambulab P1S

Bambulab X1C

Filament used for this model:

Bambulab PLA