No drill cabinet door and drawer handles for 18mm thick panels

Simple cabinet door and drawer handles with 2-sided tape mount for 18mm thick panels (3 size variations). Made for temporary use until I decide what will be the permanent “style” - although they are tougher than I initially thought. Only caveat due the 3d printed surface (and being white) they catch stains quickly (some layers of paint could mitigate this issue).

Printed mine with PLA.

Thickness of back and edge is 1.26mm - 3 lines on the standard 0.4mm nozzle. The handle part is thicker as I wanted it somewhat more ergonomic.

Advised orientation: 45 degrees. For this most slicers don't add support, but the two longer versions need it - I advise adding them manually. Also don't spare on brim, and one-by-one printing suggested.

For better stability add 2-sided tape to the back and the edge as well.