Ice Scraper v2
UPDATE
The old version is only suitable for curved windshields to a limited extent - hence the new version.
The new version consists of three parts:
Handle: icescraper_v2_handle
Intermediate ring: icescraper_v2_ring
Scraper head in 2 versions:
Default: icescraper_v2_scraper_std
Combined with sawtooth: icescraper_v2_scraper_combi
The thread has a tolerance (distance) of 0.2mm. This should ensure a relatively tight fit. If the thread fit is too loose, please adjust the pressure tolerance accordingly or scale the model slightly.
All parts are printable without support
The old version is still available for download: icescraper_v0
Infill: 20% or more
Walls: 4 or more
Material: PETG, ABS, limited also PLA
The author marked this model as their own original creation.