X3D Riser Lite 75mm high

Check my FB group if you need more info after reading below.
 

Again a riser but this time one which is in line with the outer lines of the machine.

I have tested it with the X1C and the P1S and glass fits perfect.

You will need 4 top connectors and 4 bottom connectors to fuse the 4 sides together.

Print in aby filament of choice, ABS, PETG for higher temperatures or just PLA/PLA+ for daily PLA use.

Led driver used for this riser is a Zigbee 12v non-rgb

Power transformer used is a 220v - 12v adapter 60w

Led lights used are non-rgb 12v led modules