Ball Mount To Camera Tripod Adaptor (OpenSCAD)

This was created to make use of the other mount when either the smartphone or tablet is used in the Anko Floor Standing Tablet and Smartphone Stand from Kmart.

Each end of the mount support both type of common tripod size

 | Diameter inch | Diameter mm | Thread size |
 |---------------|-------------|-------------|
 | 1/4           | 6.3500      | 20          |
 | 3/8           | 7.9375      | 16          |

Design Note: To ensure easier printability, kept threading to a minimum on each end to reduce fiction.

Future Improvements: You may want to adjust the code to add a ball mount on each end if you want to mount tablets on both sides of the tripod. This could be useful in the case of events as advertisement screens or double ended kiosk.