Clay Bead Bracelet Maker

A tool to speed up the beading process.  To use:

1. Drop beads into tube
2. Tap tube if needed to settle beads flat
3. Once you have the desired length, thread beading needle from bottom up through beads
4. You can either go ahead and thread the beads or leave on the needle
5. Pull the beads out
   1. You may need to tap the tube or rotate the tube if the beads get jammed
   2. The long slot along the bottom lets you pull either a curved needle or the bead string through

For use with long beading needles like these:

https://www.amazon.com/dp/B0B2DKBSQY

Seems to work best when printed in PLA - it needs a material that beads can freely slide against like a matte filament.  Standard printing settings should work (0.2 layer 15% infill).