The print worked great! The keys feel nice and the pressure from the keys matched the old keys well. Thanks for this.
AKAI MPK Mini Play - Replacement Keys
Tuned to match original part stiffness when playing.
11
133
0
621
updated February 10, 2024
Makes
Comments
What do you recommend to get the crossing piece printed? My printer did a good job with the keys but as soon as it was printing the elevated part with nothing on its base, the print got screwed up. I'm referring specifically to the part where all of the keys connect and then I would subsequently screw back into my MPK Mini Mk3
@Sanford_2462220 Thanks for reaching out!
I recommend the following article which covers the topic of print supports for overhangs. I printed mine off with the default settings provided by the PrusaSlicer application.
https://all3dp.com/2/prusaslicer-support-settings-explained/
What % infill did you use to get the correct "stiffness"?
@RidleyRumpus_499543 I used 100% infill for maximum strength and adjusted part thickness until it felt right.