Bear Extruder BLTouch Mount

6/4/2019: syncing with latest bear dev version

6/3/2019: syncing with latest bear dev version

5/25/2019: syncing up the body with the latest bear dev version (bear_dev_bltouch_v6.stl), per Greg's notes this should improve hotend cooling around the heatsink.

5/17/2019: Added latest dev version, removed the old one with the 3d printed filament path above the PTFE.

Update 4/25/2019: Added bear_dev_bltouch.stl, this is the latest bear dev branch body that supports MK3S sensor and has improved cooling design

Modified bear exruder body for BL Touch sensor. This is based on the latest bear extruder design (version .60). I have not yet tested this one but I am currently using the mount based on the bear .50 release and it works great!

I used a 2mm spacer to get mine at the right height. I have included a 1mm, 2mm and .5mm spacer, but you should be able to make whatever width you want by scaling the Z height as needed.

Print instructions

Licence: GNU - GPL Category: 3D Printer Parts How I Designed This

https://a360.co/2KMuN06