Scaled up to 180% and printed with recycled Prusament PLA. Afterwards sanded a bit and airbrushed.
The top was adopted in print orientation to avoid supports on the teeth.
Fantasy Mimic Chest
This is a Mimic chest I designed to hold my D&D dice. I printed this in resin and painted it
106
523
3
2879
updated
July 23, 2024
Makes
Comments
What kind of hinges were used, if you don't mind me asking?
Scaled this up to 1.25x and printed some custom hinges, then painted it with acrylics. Great model!
I don't know if the upload is a wip or something. The model is unfortunately super messy. There are many artifacts on the inside. I wasted a ton of filament before I noticed that something is off :( I attached a gif. Printing is maybe possible if "supports everywhere" is active. (edited)
@switchCTRL_171045 I haven't printed this particular model in FDM so didn't notice the issues. It printed fine for me in resin. I've fixed the issue if you want to try again. Always check your sliced files before printing!
