AliExpress Lable Printer SKADIS Holder

I bought a small printer from AliExpress and wanted to mount it up on my SKADIS, so I designed a holder for it. I also wanted it to be able to hold any extra paper/tape I have so I dont lose it, the tape I bought is 12-40mm.

There are many printers on AliExpress which share the same design, so i would think that they should be able to work on all of them.

For reference here is the printer I bought: https://www.aliexpress.com/item/1005005104049554.html?spm=a2g0o.order_list.order_list_main.100.67fd1802RI2Xx2 

I used the iFixit Mako Screwdriver Mount for Ikea Skadis model as a base and built my model on top of the back of it since I was too lazy to remeasure and stuff, so other than the back part, everything else is new.   

As for  the Skadis Hook with Dovetail, I just put it there for the ease of use.

Feel free to support me!

Except for the back everything else is different from the iFixit Mako Screwdriver Mount for Ikea Skadis, I was just lazy to redesign the back plate.

As for  the Skadis Hook with Dovetail, I just put it there for the ease of use.