D&D Logo Bookends

Here's a set of D&D themed bookends.

I used PrusaSlicer's 2-color printing. Print the first few layers in red color, then change filament to a contrasting color for the remainder of the print. No MMU necessary!

There are recesses in the bottom of the base to blue in 12mm diameter 3mm thick magnets.

The bookends are 75mm high x 75mm wide and 35mm deep.

Print Settings

Printer Brand:

Prusa

Printer:

I3 MK3S

No

Supports:

No

0.2mm

Infill:

10%

Notes:

No supports needed!
Getting the dragon's eyeliner to show when slicing is tricky. Prusaslicer may ignore it unless you have "detect thin walls" enabled.