Dumpling Pastry Cutter

This is a Dumpling Pastry Cutter specifically made for my Dumpling Maker / Mould which can be found here: https://www.printables.com/model/656020-dumpling-maker-mould But can also be used just as a 75mm pastry cutter.

It is 8mm deep and 75mm across to make the perfect sized pastry shape for the Dumpling Maker / Mould.

The 2 tabs that stick out are to help lift off the cutter and twist it to help cutting. They are also 4mm thick and can be used to put next to your rolled out pastry as a guide to make sure it is thick enough. The pastry should not be more than 4mm thick - The 8mm depth of the cutter is to make sure there is air above the pastry inside the cutter to ease removal after cutting.

I have also created a ‘Pusher’ to help push out the pastry if it is stuck in the cutter. Just align it on top of the cutter and push on it. This may or may not be needed, but is there in case you do need it.

Do you want to be able to sell any or ALL of my prints shown here on Printables.com?
If so, then click on the 'buy me a coffee' link below, (or click here) and join one of my memberships. This gives you the option of a monthly, yearly or lifetime commercial license, along with a certificate and loyalty bonus models (both commercial and non-commercial). The non-commercial items are 3rd party models that may also interest you, all in one place.
The lifetime membership offers you unique commercial items not available to anyone else as well as all of the loyalty bonus models.

Please click the LIKE (Heart) Button if you like my models. If you REALLY like them, then please also buy me a coffee at the bottom of the page. Thank you. 

Printing Instructions:

I printed these on my Creality CR-6 SE printer with Cura slicer 5.5.0 (Other printers/slicers can be used).

Material: PLA

Manufacturer: Prima Value

Colour: Light Grey

Resolution: 0.2

Nozzle: 0.4mm

Print Speed: 80mm/s (First layer @ 50mm/s)

Nozzle Temperature: 210 Degrees

Bed Temperature: 65 Degrees

Infill: 10%

Supports: No

Skirt: Yes – x2

Brim: No

Raft: No

Enjoy.

                           https://www.buymeacoffee.com/tigertone