1:24 R/C Snowcat electronics box
I didnt like the one he made because it was really weak and did not fit well, so i made my own.
15
27
0
538
updated November 25, 2023
Description
PDFIt uses m3 heatset inserts and bolts for the lid, its designed for a smaller 1500mah pack. I used some velcro to attach it to the snowcat but you could also use glue.
You will have to print with supports for the inside but set it to 85% overhang so you dont get too many anoying supports. The tolerance for the lid it 0.1mm so if ur printer cant handle that use horizontal expansion.
Model origin
The author remixed this model.
Differences of the remix compared to the original
completely new design