Simple ice scraper with handle and replaceable blade. 0.05mm tolerances. V2 of the handle adds a hole through the handle per the photo. I would recommend printing both pieces vertically as in the .3mf file. I printed at 0.2mm layer height and with PLA but you could easily print with thicker layers and PETG without much difficulty. PETG would likely give a little better heat resistence for keeping the scraper in the car throughout the year. I would love to see some makes and hear whether or not the design is helping get the ice off those windshields! Good luck and happy printing!
The author marked this model as their own original creation.