Updates | Date | Content |
17/08/2024 | Added a V2.1 with no central rib more suitable for controller with a battery |
This is a remix of the Xbox One Controller - Simple under desk holder by jericho. It seems to be suitable for Xbox 360 controllers like mine but also with newer Xbox controllers.
I found the dimensions of Jericho's model perfect but I wanted to fix the part with screws (because of cats playing with wires) and some radiuses to avoid sharp edges. I published two versions of the model, one for screws and one for double side tape. As always with woodworking screws and 3D printed parts be cautious when fixing because the screw may break your part.
Print on the side, no support needed.
The CAD model from Onshape is available here
As always with my models feel free to copy and modify it.
The Onshape model is not fully parametric, sorry I'm often a bit lazy with 3D modeling.
The author remixed this model.
I added screw holes, holes to fix the screws, a reinforcement rib at the center of the model and a ton of radiuses to avoid sharp edges.