Geared birthday gift Elefantastisch

This is a birthday gift for my 4-year-old son. It was themed to the main figures of this favorite show "Die Sendung mit dem Elefanten"

Youtube Previed: https://youtu.be/8XyIDin8ypc

Before printing make sure there is no skew issue in your printer.
- https://www.klipper3d.org/Skew_Correction.html
- https://marlinfw.org/docs/gcode/M852.html

This thing originally was planned as marble track, therefore the part in the picture and video does have a lot of brass inserts and magnets in the middle. This published version does not have these features.

The self-tapping screws in the front I'll pushed in with a hot soldering iron.

The spacer will be mounted in the back of the OuterGear after fixing the shaft with an M3 nut. If more spacing is needed, it can be modified.

Things Used: (non affiliate!) 1x AA Battery holder with switch 6x 683ZZ M1.7 8mm Self-Tapping screws

M3 Screw and nut set with various lenght

[Grub screw 3x5mm)[https://www.aliexpress.com/w/wholesale-grub-screw-3x5mm.html] DC 5V Micro N20 Gear Motor 28rpm

Category: Mechanical Toys