Blazer Ammo Rugged Box Parametric

This is a remix of @Whity Rugged Box (Parametric) https://www.printables.com/model/258431-rugged-box-parametric

This will hold the Blazer cartridge tray from the box, just remove the tray (with cartridges) and plop this in. It's a tight fit so it doesn't move around, I would suggest adding foam to the top so they don't bounce around.

I used 1/8" by 1 1/8" roll pins from Harbor Freight, they don't have enough in their kit, you can pick up a quantity of 250 from McMaster-Carr's website. Take a file to the inside most holes (do not file too much check fit periodically) Slip the pins in with a set of locking jaw pliers. Or use what you want.

No supports needed. Printed on Creality's K1 with PETG.

Lengthened long wise and made the hinges 2mm wider