Old Style Washing Machine Themed Piggy Bank

Insert a coin and wash your paper money! :))

Attention! Your paper money will not give back to you. You can take your money from machine (we recomention that do it once a week or once month) by loosen screw. :))

This old style washing machine themed money box printed and tested with Bambu Lab P1P. No glue needed. All parts locked nicely but it's depends by printer. If its not locked very well. You can adjust ping.stl and long-ping.stl.

Dimensions
Width:  134.5mm
Depth: 134.5mm
Height: 186mm

Filaments and Colors
All parts printed with Esun PLA+ filaments.

• Esun PLA+ White
• Esun PLA+ Light Blue
• Esun PLA+ Red
• Esun PLA+ Light Brown

Remcomented Print Settings

The printouts you see in the picture were printed with these settings. All settings just for better printouts. Not required. All parts printed with 0.20 layer height.

bucket.stl (textured plate)

• No any special setting needed. Maybe you can print it on a textured plate for realistic bottom view. ıf you have.

cover.stl (smooth plate)

• No any special setting needed.

cover-top.stl (smooth plate)

• No any special setting needed.

cover-top.stl (smooth plate)

• No any special setting needed.

cylinder.stl (smooth plate)

• No any special setting needed.

gear.stl (smooth plate)

• No any special setting needed.

holder.stl (textured plate)

• No any special setting needed.

long-pin.stl (smooth plate)

• No any special setting needed.

nuts.stl (smooth plate)

• No any special setting needed.

pin.stl (smooth plate)

• No any special setting needed.

screw.stl (smooth plate)

• No any special setting needed.
• Infil  100% for strong screws.

turning-wheel.stl (textured plate)

• No any special setting needed.

Panels

front-panel.stl (smooth plate)

• 0-2 Layer - Light Blue Color
• 3-5 Layer - Red Color
• 6-7 Layer - White Color
• Ironing Type: Top surfaces
• Ironing Pattern: Rectilinear

spin-to-save.stl (smooth plate)

• 0-3 Layer - Red Color
• 4-7 Layer - White Color
• Ironing Type: Top surfaces
• Ironing Pattern: Rectilinear

insert-coin-here.stl (smooth plate)

• 0-3 Layer - Red Color
• 4-7 Layer - White Color
• Ironing Type: Top surfaces
• Ironing Pattern: Rectilinear

empty-plate.stl (smooth plate)

• 80x60mm solid plate for your custom panel!

Don't forget to share your makes. Thank you!

Happy printing. <3