Motorcycle license plate mount/hanger.

This was designed to be a low profile plate hanger with hidden hardware and a wire chase. The bolts that hold the plate on the hanger are the plate lights. There is a grove to hold a pair of 22ga wires out of site. The mounting hardware to the body is hidden under two slide on caps and secured with a tiny dot of poster tack to prevent loosening from constant vibration and wind shake. The hanger on the bike in the picture is V1. I included the V2 files. I haven't printed V2 yet, waiting for the weather to break, but it should work fine. The main difference is V2 has a solid cover over the back to hide everything including the back side of the mounting hardware. The bolt cover caps work for V1 or V2. This should fit 2001-2005 GSXR 600 750 1000 this was the bike used for the design. The hanger was made as wide as possible while following the body contour, allowing for adjustment on different make and model motorcycles. The body mounting holes are oblong to further aid adjust ability. Printed in Prusament PETG Ultramarine Blue Transparent.