Crappy Piggy Bank

I made the first model 2 years ago. Now it's time for a new version
V2 with better design and more options

---

If you want to sell prints of this models you can buy a commercial license here:
https://cults3d.com/en/3d-model/home/crappy-piggy-bank-v2-commercial-license

---

• BANK - as piggy bank, flush is opening the seat - default and recommended settup
• SECRET - normal box with another secret stash under top cover - no hole for coin
• BANK-no-flush - as piggy bank without opening mechanism
• SECRET-no-flush - same as SECRET but without a flush and with more space in secret stash
• BANK-SOLID - solid model of piggy bank, only one part. You will need to break it to gather coins from the inside. - WARNING: print needs a good cooling to look good

All models, except BANK-SOLID, is also in BIG version wich is optimized 150% size of original model - better resolution, walls the same thickness as original (wich is 4x 0.4mm). You can resize it bigger if you want
If you want a model between 100% and 150% size you should resize original model up, not BIG model down

You will need a 1cm of 1.75 filament for each hindge. It will work without any glue
OR two printed rods (in files)

You can use SECRET with a cover with a hole (BANK_cover) to use as a small piggy bank and bigger storage under seat for something else

There are 4 versions of cover
with hole for coins (BANK_cover)
without any hole (SECRET_cover)
with big hole (BANK_cover-big-hole) - as big as space below
with even bigger hole (BANK_cover-big-hole_no-flush) - to use with no-flush version of base
Last two can be used to store something bigger than coins in this Toilet Box (without the need of opening the seat)

Seat is in two versions, original, more rounded, and streight wich is more ‘blocky’ but elegant
In ‘ALL’ there is original model

No-flush base models can be used only with no-flush seat models

Printed spring is not needed for mechanism to work, but it may help a little. You can change it for a spring from a pen too if you want

---

Video with printing timelapse, assembling and using
https://www.instagram.com/p/Cz4FUv5NW8R/

---

Printing tips

Made for 0.4mm nozzle

I printed it with 0.2mm layer hight
2 walls
No infill (you can use some for easier printing and stronger model)
5 top and bottom layers
No supports needed

---

UPDATE 21 XI 2023
Added second version of ‘Seat’ and solid version of piggy bank (in only one part)

UPDATE 22 XI 2023
Added ‘BIG’ version, that is optimized 150% size of original - You can resize it even bigger
Added ‘Rod’ model to use instead of filament string
Fixed ‘ALL’ models, where you could have some problems after resizing it up

UPDATE 23 XI 2023
Added 2 new versions of cover with bigger hole (as big as space below)

UPDATE 24 XII 2023
Added a photos of BIG print
Updated BIG_seat models. It was not completely flat so it could cause imperfections on top layer

---