Colored personal christmas ornaments (NOT MMU)

For printing thees parts you do not need multimaterial. it is designed for changing colour manualy by layers in slicer.

Models are prepared in 4 types in two variants( NOname/Name). Models are in diameter 60mm but i printed it also in 45mm.

I used 0.25 nozzle PETG standart settings. Prusa MK3s+ but it is possible to print in also with 0.4 but in this case i recomend do not change diameter of ornaments.

-Instructions for prusa slicer:

change colour: https://help.prusa3d.com/article/color-change_1687

add text: https://help.prusa3d.com/article/text-tool_399460

• Noname variants are prepared  for direct printing. Only add your colour variants in slicer for corect lyers.
• Name variants are prepared that you can add text ( Name, nickname etc.) by slicer and than only define colourchange

-for deer i do not create NAME variant.. because i like it withnout it. Maybe if there will be interest i will add it later.

I generated also GCODEs for PETG 0,25nozzle NONAME variant

• one for 100% scale - 30 mm diameter 
• second for 75% scale - 45mm diameter