For printing thees parts you do not need multimaterial. it is designed for changing colour manualy by layers in slicer.
Models are prepared in 4 types in two variants( NOname/Name). Models are in diameter 60mm but i printed it also in 45mm.
I used 0.25 nozzle PETG standart settings. Prusa MK3s+ but it is possible to print in also with 0.4 but in this case i recomend do not change diameter of ornaments.
-Instructions for prusa slicer:
change colour: https://help.prusa3d.com/article/color-change_1687
add text: https://help.prusa3d.com/article/text-tool_399460
-for deer i do not create NAME variant.. because i like it withnout it. Maybe if there will be interest i will add it later.
I generated also GCODEs for PETG 0,25nozzle NONAME variant
The author marked this model as their own original creation.