KLAMMA - Screw Mountable (REMIX)
Description
PDFAfter printing a bunch of KLAMMA, i fell in love with them, but really wanted some that could be screw mounted. I wasn't super keen on the KLIPPT (KLAMMA v2) because it prints in 2 parts. So i decided to make some modifications to KLAMMA so it can be screw mounted.
Version 1 was a little difficult to screw in because the top of the clip got in the way, so I made Version 2 with holes in the top of the clip to allow a screw driver through.
The holes are 3mm in diameter with a countersunk section to the screw can sit flush, the holes in the top section to allow a screw driver through are 5mm.
The holes are designed to work with the smallest screws in IKEAS FIXA or TRIXIG screw packs. However, most hardware store will have an equivalent.
Tags
Model origin
The author remixed this model.
Differences of the remix compared to the original
Added 2 counter sunk holes for screw mounting, with 2 more access holes so screws can be easily screwed in/out.