Jackpot CNC Case Remix

 I am updating from a SKR board and didn't want to re-terminate all those cables so I made adapters. Don't judge my wiring. It was a bit fiddly running all the wires through the cover on the original model so I changed how the case was split.

I didn't have the correct size Lexan for the window so I quickly made an insert panel with the V1 logo. I did a color change for the logo.

Then I had the great idea to use a Waveshare 7" touchscreen hooked up to Raspberry Pi 4 for local control.  I tool the insert panel I made, removed the logo and integrated a mount for the touchscreen. Its really solid. Here is a link to the case for the touchscreen: https://www.printables.com/model/85019-waveshare-7-hdmi-lcd-c-case

I also used the VESA mount found here: https://www.printables.com/model/85013-lcd-vesa-mount-for-articulating-arm 

Step file is included to adjust as you see fit.

The main change I made to this was to have the back of the enclosure become part of the base. That way I could run all my wires and connect and test them before closing it. I also changed the fan mount, I removed the standoffs and put holes all the way through so I could mount a fan guard. The case gets screwed together with 5 M3x8 screws.