The Drunken Elephant

Hello everyone,

Today, I'm introducing “The Drunken Elephant”. It's a bottle holder, or if you scaled down the model, you can find various uses for it.

It's only one stl file and very easy to print on any printer.

No support is needed. But it's very important to use infill with this model. 15% worked for me.

I tried to print it with FDM printer only as I don't have a resin 3d printer but I guess it will work too.

Other settings :

Tested with PLA and PLA+

Nozzle : 0.4

Raft or brim : No. Skirt is enough.

Infill : 15%. It's very important to use infill with this model as it can't be printed hollowed.

Layer : 0.2 or 0.12.. both work for me

Here is a short timelapse of printing “The Drunken Elephant”.. Enjoy it. Also if you have time, check out my Pennywise PC build :)

 If you like my designs, buy me a coffee.. :) .. I'm releasing these models and more every month for free.. so, support me please..

Also check my other models… 

“Sleeping Deer”

https://www.printables.com/model/674517-sleeping-deer

“3 Wise Elephants”

https://www.printables.com/model/645500-3-wise-elephants

“Elephant Piggy-Bank”

https://www.printables.com/model/656348-elephant-piggy-bank

Another cool model is coming soon.

Happy Printing.