Fabric tray

Tray for household items (keys, coins, clips, sweats, pens, rings, jewelery etc.). The top tray hangs on 6 legs and is made using my 3D printable fabric which gives it a nice curved shape. You can also use the lower base tray for another stuff.

This time the fabric itself consists of hexagonal pieces, which looks very nice.

There are 4 variants of the legs in the files below (you will need 6 of them):

1. straight 50mm long
2. straight 60mm long
3. Z-shaped 50mm long
4. Z-shaped 60mm long

You can print the whole model on Prusa MINI!

Printing:

The parts don't need support.

Choose which legs you like the most and print 6 of them. Of course you will need the fabric tray and the base tray.

Also think about whether you will print a central pin. It raises the middle area of the fabric a bit (see pictures). In my opinion it is better without the central pin.

Assembly:

All the joints are prepared quite loose to make sure everybody will be able to assemble everything. I know from previous experience that people tend to have less gap clearance than I do.

So slide the legs on the slots in the base tray and hang the fabric tray on the upper pins. Consider using the central pin.

Tips:

1. If you are confident with the assembly and choice of legs, you can glue the legs to the trays.
2. If you want to go bigger, just scale everything up ;).

Also check out:

https://www.youtube.com/channel/UChKp-968z1i5PN29gbR7YfA

https://www.cgtrader.com/rorys3d