Crossbows and Catapults - Board Game

Replacement Catapult for use on the board game CROSSBOWS and CATAPULTS

I have the original game but years ago one of the catapults broke so decided to make my own to replace it.

Print (1x) Catapult Body, Catapult Slingshot, Axle Spacer and (2x) Catapult Axle Cover.

Use the Axle Spacer to guide where the Axle Cover will sit as shown, so the axle lines up with the Body and Cover, as shown in a photo with the red arrows. 
Place a small amount of glue on both ends of the Cover and seal. Make sure you don't get any glue on the axle or it will not rotate.

Original shown for size comparison which is pretty much 1:1 

Use rubber band and attach as shown.

Have fun