Fish Hatch Quick-Release Mechanism for Stealth Kayaks

This modification requires one hole drilled into the lid of the fish hatch for the knob. The other two mounts are attached using longer bolts through existing holes in the hull. 

Uses M3 bolts, nuts, and washers. A length of bungee cord is also needed. 

The knob requires supports.

Two options are provided for the bungee end mounts: one is a nearly identical copy of the factory-installed mounts, but designed to accommodate M3 hardware. The other only has holes exposed on one side. 

See a full write-up of this project at https://willsides.me/project/fish-hatch-quick-release-locking-mechanism/