Amiga 3005 case for Orange Pi 5

A rather niche object, but that's what 3D printing is for: this is a 40% scale Commodore Amiga 3000-inspired case for the Orange Pi 5 or 5B (Plus may not fit, because of the M.2 connector at the bottom). It's oversized for the board because I wanted it to be tall enough for a 40mm fan. 

Dimensions are 148 × 156 × 44mm. There are 3 parts.

The front just clips on to the main case, and the lid is a plain sheet that drops in; there are no fasteners. A drop of glue may be useful if you need it to be stronger. I printed the front at 0.10mm layer height “ultra detail” to get the intricate details, with regular snug supports. The main case can be printed at 0.20mm layer height with organic supports (supports on build plate only). I used white Prusament PETG on a Prusa Mk4 (and PrusaSlicer).

I think it'd work better if the lid was U-shaped and the bottom part flat. Maybe for a future model.